Electricity Costby Voltage Drop Calculator

Electricity calculators / EV, solar & savings

Know your usage. Understand your bill.

Solar Panel Energy Sizing Calculator

Start with a representative daily energy target rather than a house size alone. Divide the target kWh by usable solar yield per kWp. Panel count rounds upward because fractional panels cannot be installed; the resulting array nameplate capacity may exceed the mathematical minimum.

Your inputs

kWh/day
h/day
%
Wp

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Required kWp = daily kWh/(equivalent sun hours×net factor); panel count = ceiling(kWp×1,000/panel Wp).

Estimate array peak capacity and a rounded panel count for a daily energy target.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

Energy matching does not guarantee off-grid reliability or full bill offset. Roof geometry, equipment ratings, storage, weather and permissions are separate.

Size a solar array against home kWh use

Start with a representative daily energy target rather than a house size alone. Divide the target kWh by usable solar yield per kWp. Panel count rounds upward because fractional panels cannot be installed; the resulting array nameplate capacity may exceed the mathematical minimum.

A grid-connected system can export energy at midday while still importing at night. Matching daily production and daily consumption therefore does not imply zero imports or a zero bill. This preliminary solar panel for home calculation does not include a battery, hourly load matching or a winter design criterion.

Check the numbers

Solar Panel Energy Sizing Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Target daily electricity: 20 kWh/day; Equivalent peak-sun hours: 4 h/day; Net performance factor: 80 %; Individual panel rating: 400 Wp. Energy-based array requirement: 6.25 kWp.

OutputComputed value
Energy-based array requirement6.25 kWp
Rounded whole-panel count16 panels
Rounded array peak rating6.4 kWp

How the answer changes

ScenarioChanged inputResult
5 kWh/dayTarget daily electricity: 5 kWh/day1.5625 kWp
10 kWh/dayTarget daily electricity: 10 kWh/day3.125 kWp
15 kWh/dayTarget daily electricity: 15 kWh/day4.6875 kWp
20 kWh/dayTarget daily electricity: 20 kWh/day6.25 kWp
30 kWh/dayTarget daily electricity: 30 kWh/day9.375 kWp
40 kWh/dayTarget daily electricity: 40 kWh/day12.5 kWp
60 kWh/dayTarget daily electricity: 60 kWh/day18.75 kWp

All inputs not changed in a row use: Target daily electricity = 20 kWh/day; Equivalent peak-sun hours = 4 h/day; Net performance factor = 80 %; Individual panel rating = 400 Wp. These are chosen examples, not current rates or product performance claims.

Common questions

Can I size solar panels from a monthly bill?

Convert matching-period kWh to average daily use, then select a representative solar resource. The money amount alone is insufficient without tariff details.

Does rounded panel count include roof spacing?

No. It is an energy-based count only. Roof area and mounting design need separate review.

Will this cover every cloudy day?

No. The formula uses an average resource and does not establish autonomy or reliability.

Can I use it for an RV array?

As an early energy budget with realistic shading and resource assumptions. Physical constraints, battery charging and electrical design are outside this tool.

Is the performance factor a fixed standard?

No. It is an explicit assumption supplied by you, not a universal prescribed value.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • Sandia National Laboratories PVPMC: PVWatts model and factors affecting PV outputhttps://pvpmc.sandia.gov/modeling-guide/2-dc-module-iv/point-value-models/pvwatts/
  • NIST SP 811, Appendix B: SI and non-SI conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors