Electricity calculators / EV, solar & savings
Know your usage. Understand your bill.
EV Charging Cost Calculator
A home EV charge purchases more electricity than the energy added to the battery when charging losses are present. For a 60 kWh usable pack charged from 20% to 80%, the stored increase is 36 kWh. At 90% wall-to-battery efficiency, the grid supplies 40 kWh. Price that grid energy at the applicable tariff.
Your inputs
Your result
Awaiting your inputsEnter your values and press Calculate. Your result will appear here.
Clear units · Editable assumptions · Published formula sources
The method
Formula and calculation steps
Stored kWh = capacity×(target−start)/100; grid kWh = stored kWh/efficiency; cost = grid kWh×rate + fee.
Estimate electric car charging cost from the intended battery energy increase and charging efficiency.
- Identify the quantities and units required by the form.
- Use measurements, a current bill or relevant equipment data for the same period.
- Apply the displayed formula, then check the assumptions and related outputs.
This is a session energy estimate, not a charging curve or live charger price. Time-based fees and preconditioning may need separate amounts.
Cost to charge an electric car at home or away
A home EV charge purchases more electricity than the energy added to the battery when charging losses are present. For a 60 kWh usable pack charged from 20% to 80%, the stored increase is 36 kWh. At 90% wall-to-battery efficiency, the grid supplies 40 kWh. Price that grid energy at the applicable tariff.
Tesla, BMW and other electric-car charging searches need the actual usable capacity and charging boundary for the specific vehicle. This form has no model database and no current public charger tariff. Use a time-of-use tool if the session crosses price windows; include known session fees without assuming a household unit rate applies at a public charger.
Continue with: Electric Car vs Gas Cost Calculator · EV Energy Range Calculator · Solar kWh Production Calculator · Solar Panel Energy Sizing Calculator
Check the numbers
EV Charging Cost Calculator: calculated examples
Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.
Worked example with the starting inputs
Usable battery capacity: 60 kWh; Starting state of charge: 20 %; Target state of charge: 80 %; Wall-to-battery efficiency: 90 %; Electricity unit rate: 0.2 currency/kWh; Additional session fee: 0 currency. Charging session cost: 8 currency.
| Output | Computed value |
|---|---|
| Charging session cost | 8 currency |
| Energy stored | 36 kWh |
| Grid energy purchased | 40 kWh |
| Modeled charging loss | 4 kWh |
How the answer changes
| Scenario | Changed input | Result |
|---|---|---|
| 20 % | Target state of charge: 20 % | 0 currency |
| 40 % | Target state of charge: 40 % | 2.666667 currency |
| 60 % | Target state of charge: 60 % | 5.333333 currency |
| 80 % | Target state of charge: 80 % | 8 currency |
| 100 % | Target state of charge: 100 % | 10.666667 currency |
All inputs not changed in a row use: Usable battery capacity = 60 kWh; Starting state of charge = 20 %; Target state of charge = 80 %; Wall-to-battery efficiency = 90 %; Electricity unit rate = 0.2 currency/kWh; Additional session fee = 0 currency. These are chosen examples, not current rates or product performance claims.
Common questions
How do I calculate cost to charge an EV at home?
Calculate grid kWh after losses, then multiply by the home unit rate applicable during charging.
Can I use this for a Tesla or BMW?
Yes as a manual energy model using the actual vehicle’s usable pack size and efficiency. It is not an official model-specific charging tool.
Do I use gross or usable battery capacity?
Use usable capacity corresponding to the vehicle’s displayed state-of-charge range, when available.
Does 60 kWh mean every charge buys 60 kWh?
No. A partial charge depends on the state-of-charge increase, and wall energy also includes losses.
Is the UK calculation different?
The arithmetic is the same. Enter pounds/kWh, converting pence to pounds, and use your actual tariff.
Which inputs should I verify before using this result?
Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.
Where do the formulas and example values come from?
The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.
Related calculators
Formula sources and references
These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.
- Virginia Cooperative Extension, publication 2901-9014: appliance energy estimationhttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
- US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php