Electricity Costby Voltage Drop Calculator

Electricity calculators / EV, solar & savings

Know your usage. Understand your bill.

EV Energy Range Calculator

Use energy actually available for driving rather than a pack’s gross rating. The average consumption must refer to battery energy over the same type of trip. Charging-station energy includes losses before storage and is not automatically equivalent to battery-side driving energy.

Your inputs

kWh
kWh/100km

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Range km = usable kWh÷(kWh per 100 km)×100; miles = km/1.609344.

Estimate electric vehicle range from available energy and a specified average battery-side consumption.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

This is a fixed-consumption energy budget. Speed, weather, road grade, cabin heating and reserve requirements are not predicted.

Electric car range from measured kWh per distance

Use energy actually available for driving rather than a pack’s gross rating. The average consumption must refer to battery energy over the same type of trip. Charging-station energy includes losses before storage and is not automatically equivalent to battery-side driving energy.

This calculation can compare two clearly stated trip scenarios but cannot predict the exact range of a Tesla, BMW or any other model from its name alone. Keep a suitable reserve for the trip conditions and use vehicle data. The output miles and kilometres describe the same modeled distance.

Check the numbers

EV Energy Range Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Usable energy available: 50 kWh; Battery energy per 100 km: 16 kWh/100km. Fixed-consumption range: 312.5 km.

OutputComputed value
Fixed-consumption range312.5 km
Equivalent range194.178498 miles

How the answer changes

ScenarioChanged inputResult
12.5 kWhUsable energy available: 12.5 kWh78.125 km
25 kWhUsable energy available: 25 kWh156.25 km
37.5 kWhUsable energy available: 37.5 kWh234.375 km
50 kWhUsable energy available: 50 kWh312.5 km
75 kWhUsable energy available: 75 kWh468.75 km
100 kWhUsable energy available: 100 kWh625 km
150 kWhUsable energy available: 150 kWh937.5 km

All inputs not changed in a row use: Usable energy available = 50 kWh; Battery energy per 100 km = 16 kWh/100km. These are chosen examples, not current rates or product performance claims.

Common questions

How do I calculate kWh usage for an EV trip?

Multiply the trip kilometres by kWh per 100 km and divide by 100. This calculator performs the inverse range relationship.

Can I enter the whole battery capacity?

Only if that capacity is genuinely usable for the modeled trip. Account for starting charge and any reserve.

Does winter range change?

It can. Enter a consumption figure representative of the actual conditions; the tool does not forecast temperature effects.

Is the displayed distance guaranteed?

No. It follows the fixed average consumption you supplied.

Can I use miles per kWh?

Convert it first: kWh per 100 km equals 62.137119 divided by miles per kWh.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • NIST SP 811, Appendix B: SI and non-SI conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors
  • US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php