Electricity Costby Voltage Drop Calculator

Electricity calculators / EV, solar & savings

Know your usage. Understand your bill.

Solar kWh Production Calculator

A solar peak rating is power under reference test conditions. It does not directly state a day’s electricity production. A 5 kWp array with four equivalent sun hours and a net factor of 80% produces 16 kWh/day in this simplified scenario. Multiply panel watts by panel count and divide by 1,000 if starting from individual Wp labels.

Your inputs

kWp
h/day
%
days

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Estimated kWh = array kWp×equivalent sun hours/day×net performance factor×days.

Estimate solar electricity generation from peak array power, supplied solar resource and an explicit net performance factor.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

This is a simplified energy budget, not PVWatts, weather retrieval or an hourly simulation. Sun hours are equivalent full-sun hours, not daylight duration.

Solar panel kWh per day and Wp to kWh

A solar peak rating is power under reference test conditions. It does not directly state a day’s electricity production. A 5 kWp array with four equivalent sun hours and a net factor of 80% produces 16 kWh/day in this simplified scenario. Multiply panel watts by panel count and divide by 1,000 if starting from individual Wp labels.

Sun resource, tilt, shading, temperature and conversion behavior vary by location and season. Searches for solar kWh India, wp naar kWh or kWp to kWh conversion require a resource assumption rather than a fixed universal factor. Published PVWatts documentation is cited for modeling context; this tool does not implement its detailed submodels or retrieve its location data.

Check the numbers

Solar kWh Production Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Array peak rating: 5 kWp; Equivalent peak-sun hours per day: 4 h/day; Net performance factor: 80 %; Days in period: 30 days. Scenario solar production: 480 kWh.

OutputComputed value
Scenario solar production480 kWh
Daily energy16 kWh/day
Array rating5,000 Wp

How the answer changes

ScenarioChanged inputResult
1.25 kWpArray peak rating: 1.25 kWp120 kWh
2.5 kWpArray peak rating: 2.5 kWp240 kWh
3.75 kWpArray peak rating: 3.75 kWp360 kWh
5 kWpArray peak rating: 5 kWp480 kWh
7.5 kWpArray peak rating: 7.5 kWp720 kWh
10 kWpArray peak rating: 10 kWp960 kWh
15 kWpArray peak rating: 15 kWp1,440 kWh

All inputs not changed in a row use: Array peak rating = 5 kWp; Equivalent peak-sun hours per day = 4 h/day; Net performance factor = 80 %; Days in period = 30 days. These are chosen examples, not current rates or product performance claims.

Common questions

Can I convert kWp directly to kWh?

No. Peak power needs a solar resource and loss model over a specified period.

Are peak-sun hours the same as daylight hours?

No. They express daily solar energy as equivalent hours at reference irradiance.

How much does one 400 W panel generate?

In a scenario with four equivalent sun hours and an 80% net factor, it produces 1.28 kWh/day. Actual site output varies.

Does this fetch weather or use an NREL API?

No. All resource inputs are supplied by the visitor; no API key is needed.

Can I calculate production per year?

Use a representative annual-average daily resource and 365 days, or add separate monthly scenarios. A single summer day is not an annual average.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • Sandia National Laboratories PVPMC: PVWatts model and factors affecting PV outputhttps://pvpmc.sandia.gov/modeling-guide/2-dc-module-iv/point-value-models/pvwatts/
  • NIST SP 811, Appendix B: SI and non-SI conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors