Electricity Costby Voltage Drop Calculator

Electricity calculators / Unit conversions

Know your usage. Understand your bill.

Power Unit Converter

A 1,011.5 W input is 1.0115 kW. No operating time is required because both units describe power. To turn the resulting kW into purchased electricity units, multiply by elapsed hours. The separate energy converter handles Btu energy, while this page handles Btu per hour.

Your inputs

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

1 kW = 1,000 W; 1 MW = 1,000,000 W; 1 mechanical hp = 745.6998716 W; 1 IT Btu/h = 0.2930710702 W.

Convert watts, kilowatts, megawatts, mechanical horsepower and IT Btu per hour as power quantities.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

This converts units of power, not appliance efficiency. Mechanical hp differs from metric horsepower; Btu/h is not Btu energy.

Watts to kW, horsepower and Btu per hour

A 1,011.5 W input is 1.0115 kW. No operating time is required because both units describe power. To turn the resulting kW into purchased electricity units, multiply by elapsed hours. The separate energy converter handles Btu energy, while this page handles Btu per hour.

Converting 1,500 W to about 5,118 IT Btu/h expresses the same power in thermal units. It does not say an air conditioner draws 1,500 W to deliver that cooling output. A motor’s mechanical horsepower can be expressed in watts, but electrical input also requires motor efficiency.

Check the numbers

Power Unit Converter: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Power value: 1,011.5 ; From unit: W; To unit: kW. Converted power: 1.0115 kW.

OutputComputed value
Converted power1.0115 kW
Same power in watts1,011.5 W
Same power in kW1.0115 kW

How the answer changes

ScenarioChanged inputResult
1011.5 W to kWPower value: 1,011.5 ; From unit: W; To unit: kW1.0115 kW
1 kW to WPower value: 1 ; From unit: kW; To unit: W1,000 W
1 MW to kWPower value: 1 ; From unit: MW; To unit: kW1,000 kW
1500 W to BtuhPower value: 1,500 ; From unit: W; To unit: Btu/h (IT)5,118.21245 Btu/h (IT)
4500 W to BtuhPower value: 4,500 ; From unit: W; To unit: Btu/h (IT)15,354.637349 Btu/h (IT)
5000 W to BtuhPower value: 5,000 ; From unit: W; To unit: Btu/h (IT)17,060.708166 Btu/h (IT)
1 hp to WPower value: 1 ; From unit: Mechanical hp; To unit: W745.699872 W
1000 W to hpPower value: 1,000 ; From unit: W; To unit: Mechanical hp1.341022 hp

All inputs not changed in a row use: Power value = 1,011.5 ; From unit = W; To unit = kW. These are chosen examples, not current rates or product performance claims.

Common questions

What is 1011.5 watts in kW?

Divide by 1,000: 1,011.5 W equals 1.0115 kW.

Can I convert 4,500 or 5,000 W to Btu/hour?

Yes. Select W and Btu/h. The result is power equivalence, not a prediction of appliance performance.

Is watts to hp an energy conversion?

No. Both describe power; a duration is needed to obtain energy.

Can I use kW instead of kWh on a bill?

No. kW is power and kWh is energy. Their numbers are related only through time.

Does this convert metric horsepower?

No. The hp option is mechanical horsepower, explicitly stated in the selector.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • NIST SP 811, Appendix B: SI and non-SI conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors
  • NIST SP 811 footnotes: International Table Btu and therm conventionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-footnotes