Electricity Costby Voltage Drop Calculator

Electricity calculators / Unit conversions

Know your usage. Understand your bill.

kWh to Amp-Hours Calculator

A kWh-to-Ah conversion must specify voltage because a given quantity of energy can correspond to different amounts of charge. Divide Wh by nominal volts, or multiply kWh by 1,000 first. The result is a nominal capacity relationship that must use a consistent battery label basis.

Your inputs

kWh
V

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Ah = kWh×1,000/nominal V; mAh = Ah×1,000.

Calculate battery Ah and mAh from energy and the corresponding nominal voltage.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

This nominal conversion does not infer a changing discharge-voltage curve or guarantee usable capacity.

Energy to charge capacity at a stated voltage

A kWh-to-Ah conversion must specify voltage because a given quantity of energy can correspond to different amounts of charge. Divide Wh by nominal volts, or multiply kWh by 1,000 first. The result is a nominal capacity relationship that must use a consistent battery label basis.

For a 53 Wh pack at 3.7 V, enter 0.053 kWh and 3.7 V. At 5 V the equivalent Ah is different even though the energy is unchanged. A power bank’s nominal cell capacity and its delivered USB capacity are not automatically equal, since voltage conversion introduces losses.

Check the numbers

kWh to Amp-Hours Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Nominal stored energy: 1.2 kWh; Corresponding nominal voltage: 12 V. Nominal charge capacity: 100 Ah.

OutputComputed value
Nominal charge capacity100 Ah
Nominal capacity100,000 mAh
Energy1,200 Wh

How the answer changes

ScenarioChanged inputResult
0.3 kWhNominal stored energy: 0.3 kWh25 Ah
0.6 kWhNominal stored energy: 0.6 kWh50 Ah
0.9 kWhNominal stored energy: 0.9 kWh75 Ah
1.2 kWhNominal stored energy: 1.2 kWh100 Ah
1.8 kWhNominal stored energy: 1.8 kWh150 Ah
2.4 kWhNominal stored energy: 2.4 kWh200 Ah
3.6 kWhNominal stored energy: 3.6 kWh300 Ah

All inputs not changed in a row use: Nominal stored energy = 1.2 kWh; Corresponding nominal voltage = 12 V. These are chosen examples, not current rates or product performance claims.

Common questions

Can I convert kWh to Ah without voltage?

No. Ah measures charge and kWh measures energy; voltage connects them.

Is kWh to amps the same calculation?

No. Ah is accumulated charge. Current in amps additionally requires a duration.

How do I convert watt-hours to amp-hours?

Divide Wh by nominal voltage. Convert Wh to kWh before using the input on this page.

How many mAh is 100 Wh at 3.7 V?

Approximately 27,027 mAh nominally, before conversion or discharge losses.

Can I size an inverter with this?

No. Inverter power, surge and operating voltage compatibility are separate from energy capacity.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • NIST SP 811, Appendix B: SI and non-SI conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors
  • US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php