Electricity calculators / Gas, carbon & business
Know your usage. Understand your bill.
Gas Meter to kWh Calculator
Gas meters record volume, so a gas unit is not the same as an electricity unit. First subtract comparable gas readings outside this form, then enter the consumed volume. Under the cited UK method, cubic feet are multiplied by 0.0283, or hundreds of cubic feet by 2.83, before the calorific and correction factors are applied.
Your inputs
Your result
Awaiting your inputsEnter your values and press Calculate. Your result will appear here.
Clear units · Editable assumptions · Published formula sources
The method
Formula and calculation steps
kWh = gas volume in m³×volume correction×calorific value MJ/m³÷3.6; energy cost = kWh×rate.
Convert a consumed gas meter volume into billed energy using explicit calorific and volume-correction factors.
- Identify the quantities and units required by the form.
- Use measurements, a current bill or relevant equipment data for the same period.
- Apply the displayed formula, then check the assumptions and related outputs.
Default factors illustrate the UK published method. Use your bill’s actual factors and units; UK billing rounded ft³ factors are used here, not a universal gas composition.
Gas m³ to kWh, imperial units and British Gas-style readings
Gas meters record volume, so a gas unit is not the same as an electricity unit. First subtract comparable gas readings outside this form, then enter the consumed volume. Under the cited UK method, cubic feet are multiplied by 0.0283, or hundreds of cubic feet by 2.83, before the calorific and correction factors are applied.
Calorific value changes with the supplied gas and should come from the bill. The 1.02264 factor reflects a UK billing correction and should not be assumed for Belgium, France or every other country. This form does not connect to British Gas or any supplier and does not convert gas heat into an equivalent appliance’s electrical consumption.
Continue with: kWh to Gas Volume Calculator · Gas vs Electric Heating Cost Calculator · Electricity Carbon Emissions Calculator · Electricity Demand Charge Calculator
Check the numbers
Gas Meter to kWh Calculator: calculated examples
Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.
Worked example with the starting inputs
Consumed gas volume: 100 meter units; Gas volume unit: Cubic metres (m³); Calorific value from bill: 39.5 MJ/m³; Volume correction factor: 1.02264 ×; Electricity unit rate: 0.2 currency/kWh. Gas energy under entered factors: 1,122.063333 kWh.
| Output | Computed value |
|---|---|
| Gas energy under entered factors | 1,122.063333 kWh |
| Uncorrected gas volume | 100 m³ |
| Energy-only gas cost | 224.412667 currency |
How the answer changes
| Scenario | Changed input | Result |
|---|---|---|
| 25 meter units | Consumed gas volume: 25 meter units | 280.515833 kWh |
| 50 meter units | Consumed gas volume: 50 meter units | 561.031667 kWh |
| 75 meter units | Consumed gas volume: 75 meter units | 841.5475 kWh |
| 100 meter units | Consumed gas volume: 100 meter units | 1,122.063333 kWh |
| 150 meter units | Consumed gas volume: 150 meter units | 1,683.095 kWh |
| 200 meter units | Consumed gas volume: 200 meter units | 2,244.126667 kWh |
| 300 meter units | Consumed gas volume: 300 meter units | 3,366.19 kWh |
All inputs not changed in a row use: Consumed gas volume = 100 meter units; Gas volume unit = Cubic metres (m³); Calorific value from bill = 39.5 MJ/m³; Volume correction factor = 1.02264 ×; Electricity unit rate = 0.2 currency/kWh. These are chosen examples, not current rates or product performance claims.
Common questions
How do I calculate gas kWh from a meter reading?
Subtract the earlier volume reading, confirm whether its units are m³, ft³ or hundreds of ft³, then apply the bill’s calorific and correction factors.
What is 100 m³ in kWh with the example factors?
100 × 1.02264 × 39.5 ÷ 3.6 is about 1,122.0633 kWh.
Can I convert one gas unit directly to one kWh?
No. A gas meter unit is volume and requires calorific information. One electricity unit commonly means one kWh.
Does this calculate the full gas bill?
It prices energy only. Standing charges, tax and other line items need separate treatment.
Does this support PCI and PCS automatically?
No. Use a calorific value with the correct higher/lower heating-value basis for the bill. There is no universal PCI-to-PCS ratio.
How do I convert kWh back to m³?
Use the inverse gas-volume calculator with the same calorific and correction assumptions.
Which inputs should I verify before using this result?
Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.
Where do the formulas and example values come from?
The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.
Related calculators
Formula sources and references
These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.
- UK Office for Product Safety and Standards: gas readings and bill calculationhttps://www.gov.uk/guidance/gas-meter-readings-and-bill-calculation
- NIST SP 811, Appendix B: SI and non-SI conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors