Electricity Costby Voltage Drop Calculator

Electricity calculators / Gas, carbon & business

Know your usage. Understand your bill.

Electricity Demand Charge Calculator

Commercial bills can charge for the maximum relevant interval demand as well as total energy. Reducing monthly kWh does not necessarily reduce the billed peak if a short high-load event remains. The demand rate must correspond to the same period as the fixed and energy amounts.

Your inputs

kW
currency/kW/period
kWh
currency/kWh
currency

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Total = billed peak kW×demand rate + period kWh×energy rate + fixed period charge.

Separate demand, energy and fixed components of a commercial electricity bill.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

Enter demand established under the tariff. Ratchets, minimum billed demand, kVA penalties and contracted-capacity rules are not inferred from kWh.

Industrial and small-business demand charges

Commercial bills can charge for the maximum relevant interval demand as well as total energy. Reducing monthly kWh does not necessarily reduce the billed peak if a short high-load event remains. The demand rate must correspond to the same period as the fixed and energy amounts.

Use the actual tariff’s billed demand rather than estimating it from monthly energy alone. Some schedules use a demand ratchet, minimum or kVA instead of measured real kW; those require specific rules outside this form. This calculator is an explicit three-component example rather than an official industrial billing system.

Check the numbers

Electricity Demand Charge Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Billed peak demand: 20 kW; Demand charge rate: 15 currency/kW/period; Energy used: 300 kWh; Electricity unit rate: 0.2 currency/kWh; Fixed charge for the period: 10 currency. Three-component bill: 370 currency.

OutputComputed value
Three-component bill370 currency
Demand charge300 currency
Energy charge60 currency
Fixed charge10 currency

How the answer changes

ScenarioChanged inputResult
5 kWBilled peak demand: 5 kW145 currency
10 kWBilled peak demand: 10 kW220 currency
15 kWBilled peak demand: 15 kW295 currency
20 kWBilled peak demand: 20 kW370 currency
30 kWBilled peak demand: 30 kW520 currency
40 kWBilled peak demand: 40 kW670 currency
60 kWBilled peak demand: 60 kW970 currency

All inputs not changed in a row use: Billed peak demand = 20 kW; Demand charge rate = 15 currency/kW/period; Energy used = 300 kWh; Electricity unit rate = 0.2 currency/kWh; Fixed charge for the period = 10 currency. These are chosen examples, not current rates or product performance claims.

Common questions

Can I calculate maximum demand from kWh?

Not from a total alone. Matching interval energy can establish interval-average demand, and its maximum is then evaluated under the tariff.

Are demand kW and energy kWh charged the same way?

No. One prices the relevant power peak and the other prices accumulated energy.

Can I enter a kVA demand tariff?

This page is labeled for kW demand. Convert only with an appropriate tariff and power-factor basis, or use an applicable utility calculator.

What is a ratchet?

A tariff can retain a billing minimum related to earlier demand. This tool does not calculate that historical rule.

Does lowering use always reduce the demand fee?

No. The peak billing interval may remain unchanged even if many other hours use less electricity.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php
  • US Department of Energy: Fundamentals Handbook, Electrical Science, Volume 3, AC powerhttps://www.energy.gov/sites/default/files/2026-04/DOE-HDBK-1011-92_VOL3.pdf