Electricity calculators / EV, solar & savings
Know your usage. Understand your bill.
Energy Efficiency Payback Calculator
An energy savings estimate should compare equivalent service: the same lighting output, comfort, workload or production. If operating hours or occupancy changed, raw annual energy differences may not isolate the upgrade. Normalize the comparison or clearly state the broader scenario change.
Your inputs
Your result
Awaiting your inputsEnter your values and press Calculate. Your result will appear here.
Clear units · Editable assumptions · Published formula sources
The method
Formula and calculation steps
Annual kWh saved = before−after; annual money saved = kWh saved×rate; simple payback = investment/positive savings.
Compare two annual energy scenarios and calculate simple payback for an efficiency upgrade.
- Identify the quantities and units required by the form.
- Use measurements, a current bill or relevant equipment data for the same period.
- Apply the displayed formula, then check the assumptions and related outputs.
Keep equal service, climate and measurement boundaries. This excludes maintenance changes, rebates, financing and future electricity price changes.
Compare energy use before and after an equipment change
An energy savings estimate should compare equivalent service: the same lighting output, comfort, workload or production. If operating hours or occupancy changed, raw annual energy differences may not isolate the upgrade. Normalize the comparison or clearly state the broader scenario change.
A kWh comparison calculator for energy savings converts a stated reduction into an energy-only financial benefit. It does not remove household fixed fees unless those genuinely change. Simple payback is useful for an initial comparison but does not describe discounted cash flow, useful life or the risk that actual savings differ.
Continue with: EV Charging Cost Calculator · Electric Car vs Gas Cost Calculator · EV Energy Range Calculator · Solar kWh Production Calculator
Check the numbers
Energy Efficiency Payback Calculator: calculated examples
Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.
Worked example with the starting inputs
Annual energy before upgrade: 5,000 kWh/year; Annual energy after upgrade: 3,500 kWh/year; Electricity unit rate: 0.2 currency/kWh; Installed upgrade cost: 600 currency. Annual electricity savings: 300 currency/year.
| Output | Computed value |
|---|---|
| Annual electricity savings | 300 currency/year |
| Annual energy reduction | 1,500 kWh/year |
| Reduction from baseline | 30 % |
| Simple payback | 2 years |
How the answer changes
| Scenario | Changed input | Result |
|---|---|---|
| 875 kWh/year | Annual energy after upgrade: 875 kWh/year | 825 currency/year |
| 1,750 kWh/year | Annual energy after upgrade: 1,750 kWh/year | 650 currency/year |
| 2,625 kWh/year | Annual energy after upgrade: 2,625 kWh/year | 475 currency/year |
| 3,500 kWh/year | Annual energy after upgrade: 3,500 kWh/year | 300 currency/year |
| 5,250 kWh/year | Annual energy after upgrade: 5,250 kWh/year | -50 currency/year |
| 7,000 kWh/year | Annual energy after upgrade: 7,000 kWh/year | -400 currency/year |
| 10,500 kWh/year | Annual energy after upgrade: 10,500 kWh/year | -1,100 currency/year |
All inputs not changed in a row use: Annual energy before upgrade = 5,000 kWh/year; Annual energy after upgrade = 3,500 kWh/year; Electricity unit rate = 0.2 currency/kWh; Installed upgrade cost = 600 currency. These are chosen examples, not current rates or product performance claims.
Common questions
How do I calculate the percentage energy saving?
Divide before-minus-after kWh by the before figure and multiply by 100. A zero baseline cannot yield a defined percentage.
What if the new equipment uses more energy?
Savings are negative, and there is no positive simple payback from electricity savings alone.
Can I use measured monthly data?
Yes if both quantities represent the same annualized or matching period. The labels on this page assume annual kWh.
Does this include maintenance savings?
No. It models electricity energy savings only.
Can I compare solar and battery upgrades?
Only if you independently establish comparable purchased-energy outcomes. The tool does not simulate solar or storage operation.
Which inputs should I verify before using this result?
Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.
Where do the formulas and example values come from?
The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.
Related calculators
Formula sources and references
These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.
- Virginia Cooperative Extension, publication 2901-9014: appliance energy estimationhttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
- US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php