Electricity Costby Voltage Drop Calculator

Electricity calculators / Bills & tariffs

Know your usage. Understand your bill.

Time of Use Electricity Calculator

Time-of-use electricity pricing depends on when a kWh is consumed. A lower overnight rate only saves money for energy that actually moves to that interval. A peak-hours electricity bill calculator therefore needs energy by period rather than a single monthly total. If there is no shoulder band, leave its kWh at zero.

Your inputs

kWh
currency/kWh
kWh
currency/kWh
kWh
currency/kWh
currency

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Period cost = peak kWh × peak rate + off-peak kWh × off-peak rate + shoulder kWh × shoulder rate + fixed charge.

Price separate peak, off-peak and shoulder electricity use and inspect the blended energy rate.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

Tariff hours, seasons, holidays and daylight saving are not inferred. Enter kWh already assigned to the correct billing buckets.

Off-peak electricity times and moving appliance use

Time-of-use electricity pricing depends on when a kWh is consumed. A lower overnight rate only saves money for energy that actually moves to that interval. A peak-hours electricity bill calculator therefore needs energy by period rather than a single monthly total. If there is no shoulder band, leave its kWh at zero.

Use interval meter data or a known appliance schedule to assign consumption. A home EV charger, storage heater, pool pump or dishwasher can have flexible timing, but essential operation and equipment settings matter. This page does not announce universal off-peak hours for Octopus, UK Economy tariffs, Australian retailers or any named supplier; the contract controls the clock.

Check the numbers

Time of Use Electricity Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Peak energy: 100 kWh; Peak rate: 0.35 currency/kWh; Off-peak energy: 200 kWh; Off-peak rate: 0.12 currency/kWh; Shoulder energy: 0 kWh; Shoulder rate: 0.2 currency/kWh; Fixed charge for the period: 10 currency. Time-of-use total: 69 currency.

OutputComputed value
Time-of-use total69 currency
Energy use300 kWh
Energy-weighted rate0.196667 currency/kWh
All-in rate0.23 currency/kWh

How the answer changes

ScenarioChanged inputResult
50 kWhOff-peak energy: 50 kWh51 currency
100 kWhOff-peak energy: 100 kWh57 currency
150 kWhOff-peak energy: 150 kWh63 currency
200 kWhOff-peak energy: 200 kWh69 currency
300 kWhOff-peak energy: 300 kWh81 currency
400 kWhOff-peak energy: 400 kWh93 currency
600 kWhOff-peak energy: 600 kWh117 currency

All inputs not changed in a row use: Peak energy = 100 kWh; Peak rate = 0.35 currency/kWh; Off-peak energy = 200 kWh; Off-peak rate = 0.12 currency/kWh; Shoulder energy = 0 kWh; Shoulder rate = 0.2 currency/kWh; Fixed charge for the period = 10 currency. These are chosen examples, not current rates or product performance claims.

Common questions

Can I find my off-peak times here?

No. Check your contract, meter configuration and supplier calendar. The form prices supplied period totals; it does not discover the allowed windows.

How much does shifting 100 kWh save?

Before other effects, multiply 100 by the difference between peak and off-peak rates. At 0.35 and 0.12, that is 23 currency units.

Is the blended rate the same as the billed unit rate?

The energy-weighted average excludes fixed charges. The all-in rate shown includes the entered fixed amount and is useful only for this consumption mix.

Does overnight charging always save money?

Compare all energy rates and fixed charges on both plans. A cheaper night rate can be offset by a more expensive daytime rate.

Can I price a tariff that changes every half hour?

Only after aggregating each interval into matching price buckets. A three-band model cannot reproduce hundreds of separate prices exactly.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • Virginia Cooperative Extension, publication 2901-9014: appliance energy estimationhttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
  • US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php