Electricity Costby Voltage Drop Calculator

Electricity calculators / Bills & tariffs

Know your usage. Understand your bill.

Meter Reading Electricity Calculator

An electricity meter usually accumulates kWh rather than resetting each month. Subtract the opening reading from the closing reading for the same register. A meter multiplier is relevant only when specified for the installation; ordinary domestic readings commonly already represent kWh. Do not multiply by 1,000 simply because the display says kilowatt-hours.

Your inputs

kWh
kWh
×
currency/kWh
days

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Period kWh = (current reading − previous reading) × meter multiplier; energy cost = period kWh × rate.

Calculate electricity units, cost and average daily usage from two cumulative meter readings.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

Use the same register at both dates. Meter rollover, replacement and separate import/export registers need reconciliation; this form rejects a lower current reading.

Read a meter, calculate units and check a submeter bill

An electricity meter usually accumulates kWh rather than resetting each month. Subtract the opening reading from the closing reading for the same register. A meter multiplier is relevant only when specified for the installation; ordinary domestic readings commonly already represent kWh. Do not multiply by 1,000 simply because the display says kilowatt-hours.

A sub meter electricity bill calculation uses the same difference method for the measured branch. Common-area electricity, network losses, fixed fees and a tenancy agreement do not follow automatically from the meter difference. For dual-rate or export meters, calculate each register separately and apply its own tariff, keeping imports and exports distinct.

Check the numbers

Meter Reading Electricity Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Previous cumulative reading: 12,000 kWh; Current cumulative reading: 12,300 kWh; Meter multiplier: 1 ×; Electricity unit rate: 0.2 currency/kWh; Days in period: 30 days. Metered energy cost: 60 currency.

OutputComputed value
Metered energy cost60 currency
Metered energy300 kWh
Average daily use10 kWh/day

How the answer changes

ScenarioChanged inputResult
10 kWh register differenceCurrent cumulative reading: 12,010 kWh2 currency
50 kWh register differenceCurrent cumulative reading: 12,050 kWh10 currency
100 kWh register differenceCurrent cumulative reading: 12,100 kWh20 currency
200 kWh register differenceCurrent cumulative reading: 12,200 kWh40 currency
300 kWh register differenceCurrent cumulative reading: 12,300 kWh60 currency
500 kWh register differenceCurrent cumulative reading: 12,500 kWh100 currency
1000 kWh register differenceCurrent cumulative reading: 13,000 kWh200 currency

All inputs not changed in a row use: Previous cumulative reading = 12,000 kWh; Current cumulative reading = 12,300 kWh; Meter multiplier = 1 ×; Electricity unit rate = 0.2 currency/kWh; Days in period = 30 days. These are chosen examples, not current rates or product performance claims.

Common questions

How do I calculate my electric bill from a meter reading?

Subtract matching cumulative readings, apply the actual meter multiplier, and price the resulting kWh. Add fixed fees and other charges separately.

Does one unit equal one kWh?

For ordinary electrical billing, one unit commonly means one kWh. A raw pulse count or gas meter unit is different and needs its own conversion.

Why does a smart meter show kW and kWh?

kW is the power at an instant or averaged over a short interval. kWh is accumulated energy over time. Use the cumulative kWh registers for this calculation.

Can this read my meter in real time?

No. It uses readings entered by you. There is no smart-meter account connection or live electricity monitoring.

Can I split a shared electricity bill with this?

Use the measured submeter kWh to establish usage, then use the shared bill tool for an explicitly chosen allocation of fixed charges. Confirm the agreed allocation method.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • Virginia Cooperative Extension, publication 2901-9014: appliance energy estimationhttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
  • US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php