Electricity Costby Voltage Drop Calculator

Electricity calculators / Bills & tariffs

Know your usage. Understand your bill.

Tiered Electricity Bill Calculator

Progressive billing charges the first block of energy at one rate and the next block at another. For a schedule ending its first band at 100 kWh and its second at 300 kWh, enter block sizes of 100 and 200. The allocation table shows how much energy falls in each band so that a higher rate is not applied to all previous consumption.

Your inputs

kWh
kWh
currency/kWh
kWh
currency/kWh
currency/kWh
currency

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Cost = min(E,B1)r1 + min(max(E−B1,0),B2)r2 + max(E−B1−B2,0)r3 + fixed charge.

Calculate three progressive electricity slabs using block sizes and rates from your tariff.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

These are incremental blocks, not all-units pricing. The second input is the size of block two, not its cumulative upper boundary. No official tariff is preloaded.

Electricity slab calculation with transparent block allocation

Progressive billing charges the first block of energy at one rate and the next block at another. For a schedule ending its first band at 100 kWh and its second at 300 kWh, enter block sizes of 100 and 200. The allocation table shows how much energy falls in each band so that a higher rate is not applied to all previous consumption.

Indian state tariff searches such as Tamil Nadu, Kerala, Maharashtra, Punjab, Delhi, Bihar and West Bengal can refer to different customer classes, billing frequencies and subsidy rules. Sri Lanka, Bangladesh and Pakistan also have schedules that may depend on usage category or protected status. Use this tool only for the progressive part of a verified schedule and keep taxes or eligibility adjustments separate.

Check the numbers

Tiered Electricity Bill Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Energy used: 300 kWh; First block size: 100 kWh; First block rate: 0.15 currency/kWh; Second block size: 200 kWh; Second block rate: 0.2 currency/kWh; Rate above both blocks: 0.3 currency/kWh; Fixed charge for the period: 10 currency. Progressive tier bill: 65 currency.

OutputComputed value
Progressive tier bill65 currency
First block energy100 kWh
Second block energy200 kWh
Remaining energy0 kWh
Fixed amount10 currency

How the answer changes

ScenarioChanged inputResult
75 kWhEnergy used: 75 kWh21.25 currency
150 kWhEnergy used: 150 kWh35 currency
225 kWhEnergy used: 225 kWh50 currency
300 kWhEnergy used: 300 kWh65 currency
450 kWhEnergy used: 450 kWh110 currency
600 kWhEnergy used: 600 kWh155 currency
900 kWhEnergy used: 900 kWh245 currency

All inputs not changed in a row use: Energy used = 300 kWh; First block size = 100 kWh; First block rate = 0.15 currency/kWh; Second block size = 200 kWh; Second block rate = 0.2 currency/kWh; Rate above both blocks = 0.3 currency/kWh; Fixed charge for the period = 10 currency. These are chosen examples, not current rates or product performance claims.

Common questions

Is a slab limit the same as block size?

No. If cumulative limits are 100 and 300, block sizes are 100 and 200. Entering 300 for the second size incorrectly extends that band to 400.

Does a higher slab rate apply to every unit?

Only if the tariff explicitly uses all-units pricing, which this calculator does not implement. Here each rate applies only to the energy in its own block.

Can I use this for TNEB, KSEB, MSEB or PSPCL?

Only after checking the current official schedule and whether this three-block incremental model fits. Free-unit allowances, bimonthly rules and special surcharges are not automatically supplied.

Can I model a fourth band?

Not directly. This page implements two finite blocks and one open-ended band. Use a worksheet or official billing tool if the tariff has more bands.

What does the fixed charge represent?

It is one amount for the whole period. Do not enter a daily fee unless you first multiply it by the number of billing days.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • Virginia Cooperative Extension, publication 2901-9014: appliance energy estimationhttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
  • US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php