Electricity Costby Voltage Drop Calculator

Electricity calculators / Appliances & equipment

Know your usage. Understand your bill.

Lighting Energy Savings Calculator

A light bulb electricity cost calculation uses actual lamp input, including a driver where relevant. A bulb advertised as a 60 W equivalent might draw 9 W; use 9 W as the purchased power. The old and new lighting schedules are assumed identical so that the difference reflects power reduction rather than fewer hours of lighting.

Your inputs

W
W
lamps
h/day
currency/kWh
currency

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Annual kWh saved = (oldW−newW)×lamps×hours/day×365/1,000; savings = kWh saved×rate.

Compare lighting electricity use and simple payback from measured old and replacement input watts.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

Wattage is not brightness. Confirm lumens, distribution, color, dimming and suitability separately; the form does not equate a fixed LED wattage with every incandescent lamp.

LED lighting cost, bulb wattage and replacement savings

A light bulb electricity cost calculation uses actual lamp input, including a driver where relevant. A bulb advertised as a 60 W equivalent might draw 9 W; use 9 W as the purchased power. The old and new lighting schedules are assumed identical so that the difference reflects power reduction rather than fewer hours of lighting.

An LED wattage conversion chart cannot reliably replace a lumen comparison for every product. Luminous efficacy varies, and room lighting needs depend on area and utilization. This page calculates energy and cost savings, not the number of lumens a room requires or the electrical size of a driver. Payback excludes financing, maintenance changes and future price changes.

Check the numbers

Lighting Energy Savings Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Existing lamp input: 60 W; Replacement lamp input: 9 W; Number of lamps: 10 lamps; Operating hours per day: 4 h/day; Electricity unit rate: 0.2 currency/kWh; Total installed replacement cost: 50 currency. Annual lighting savings: 148.92 currency/year.

OutputComputed value
Annual lighting savings148.92 currency/year
Annual electricity saved744.6 kWh/year
Replacement annual energy131.4 kWh/year
Simple payback0.335751 years

How the answer changes

ScenarioChanged inputResult
1 h/dayOperating hours per day: 1 h/day37.23 currency/year
2 h/dayOperating hours per day: 2 h/day74.46 currency/year
3 h/dayOperating hours per day: 3 h/day111.69 currency/year
4 h/dayOperating hours per day: 4 h/day148.92 currency/year
6 h/dayOperating hours per day: 6 h/day223.38 currency/year
8 h/dayOperating hours per day: 8 h/day297.84 currency/year
12 h/dayOperating hours per day: 12 h/day446.76 currency/year

All inputs not changed in a row use: Existing lamp input = 60 W; Replacement lamp input = 9 W; Number of lamps = 10 lamps; Operating hours per day = 4 h/day; Electricity unit rate = 0.2 currency/kWh; Total installed replacement cost = 50 currency. These are chosen examples, not current rates or product performance claims.

Common questions

Can I convert LED watts to lumens here?

No fixed watts-to-lumens conversion exists without a product efficacy. Check the lamp’s lumen rating and compare equivalent light output.

How much do ten 9 W bulbs use?

At four hours per day they use 0.36 kWh/day. Multiply by your rate to obtain the energy cost.

Does 60 W equivalent mean a 60 W electricity draw?

No. Equivalent wattage is a brightness comparison claim; use the actual input wattage for cost.

What if the replacement consumes more power?

The result shows negative savings and no positive simple payback under these assumptions.

Can I calculate LED driver wattage?

Use a verified total input including driver losses. This tool does not perform driver compatibility or loading design.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • Virginia Cooperative Extension, publication 2901-9014: appliance energy estimationhttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
  • US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php