Electricity Costby Voltage Drop Calculator

Electricity calculators / Appliances & equipment

Know your usage. Understand your bill.

PC & Server Electricity Cost Calculator

A gaming PC electricity bill depends on workload and time. A 750 W power supply is a capacity rating, not proof that the computer draws 750 W continuously. Use a plug-in meter for the complete system, or a credible measured wall-input figure for the same workload. Include monitors and accessories in the wall measurement or calculate them separately.

Your inputs

W
W
W
h
h
days
currency/kWh

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Daily kWh = (activeW×activeH + idleW×idleH + sleepW×(24−activeH−idleH))/1,000.

Price PC or server energy across active, idle and sleep states using wall-input measurements.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

A PSU rating or CPU TDP is not wall power. Active and idle hours together cannot exceed 24; the remaining time uses the sleep/off input.

Gaming PCs, computer idle draw and server power consumption

A gaming PC electricity bill depends on workload and time. A 750 W power supply is a capacity rating, not proof that the computer draws 750 W continuously. Use a plug-in meter for the complete system, or a credible measured wall-input figure for the same workload. Include monitors and accessories in the wall measurement or calculate them separately.

For an always-on server, set idle and active hours to account for the whole day and enter any remaining state deliberately. This tool does not maintain a CPU/GPU parts database, replace PC Part Picker or choose a PSU for a build. Facility cooling and UPS losses are not included unless already inside the measured power boundary.

Check the numbers

PC & Server Electricity Cost Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Active system wall power: 250 W; Idle system wall power: 60 W; Sleep/off wall power: 2 W; Active hours per day: 6 h; Idle hours per day: 4 h; Days in period: 30 days; Electricity unit rate: 0.2 currency/kWh. PC / server energy cost: 10.608 currency.

OutputComputed value
PC / server energy cost10.608 currency
Daily energy1.768 kWh/day
Period energy53.04 kWh
Remaining sleep/off time14 h/day

How the answer changes

ScenarioChanged inputResult
62.5 WActive system wall power: 62.5 W3.858 currency
125 WActive system wall power: 125 W6.108 currency
187.5 WActive system wall power: 187.5 W8.358 currency
250 WActive system wall power: 250 W10.608 currency
375 WActive system wall power: 375 W15.108 currency
500 WActive system wall power: 500 W19.608 currency
750 WActive system wall power: 750 W28.608 currency

All inputs not changed in a row use: Active system wall power = 250 W; Idle system wall power = 60 W; Sleep/off wall power = 2 W; Active hours per day = 6 h; Idle hours per day = 4 h; Days in period = 30 days; Electricity unit rate = 0.2 currency/kWh. These are chosen examples, not current rates or product performance claims.

Common questions

Can I estimate PC power by selecting components?

This page accepts measured or independently estimated system wall power; it has no parts inventory or component power database.

Should I add PSU efficiency again?

Not if the input is measured at the wall. That reading already includes the PSU’s conversion loss.

How do I calculate a server running 24/7?

Use active plus idle hours totaling 24, or use one representative state for all 24 hours. Confirm the average across varying workload.

Does CPU TDP equal electricity consumption?

No. TDP and component design ratings do not establish the whole system’s AC input for a particular workload.

What if my PC uses 100 W while idle?

At 24 hours every day it consumes 2.4 kWh/day before any separate active-state use. Enter your actual idle schedule to price it.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • Virginia Cooperative Extension, publication 2901-9014: appliance energy estimationhttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
  • US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php