Electricity Costby Voltage Drop Calculator

Electricity calculators / Bills & tariffs

Know your usage. Understand your bill.

Electricity Plan Comparison Calculator

The cheapest advertised electricity rate need not produce the cheapest bill at your consumption. Put both plans on the same billing period and include the fixed amount for each. In Texas, inspect the Electricity Facts Label and usage-dependent credits rather than treating one headline cents/kWh figure as valid at every usage level.

Your inputs

kWh
currency/kWh
currency
currency/kWh
currency

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Plan A = E×rA + fixedA; plan B = E×rB + fixedB; break-even kWh = (fixedB−fixedA)/(rA−rB).

Compare two flat electricity tariffs at the same usage, including fixed charges and their crossover point.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

This is not a retailer marketplace. Bill credits at usage thresholds, minimum usage fees, demand charges and promotional terms need explicit separate comparison.

Compare Texas, business and household electricity rates fairly

The cheapest advertised electricity rate need not produce the cheapest bill at your consumption. Put both plans on the same billing period and include the fixed amount for each. In Texas, inspect the Electricity Facts Label and usage-dependent credits rather than treating one headline cents/kWh figure as valid at every usage level.

For business and commercial electricity rates, separate demand charges and contract conditions before comparing an energy price. For Australia, New Zealand, Alberta, the UK or Singapore, use current offers in the same currency and tax basis. This calculator compares the two offers you supply; it does not determine the best available supplier or guarantee future savings.

Check the numbers

Electricity Plan Comparison Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Energy used: 300 kWh; Plan A energy rate: 0.2 currency/kWh; Plan A fixed period charge: 15 currency; Plan B energy rate: 0.24 currency/kWh; Plan B fixed period charge: 5 currency. Plan B savings versus A: -2 currency.

OutputComputed value
Plan B savings versus A-2 currency
Plan A cost75 currency
Plan B cost77 currency
Nonnegative crossover250 kWh

How the answer changes

ScenarioChanged inputResult
75 kWhEnergy used: 75 kWh7 currency
150 kWhEnergy used: 150 kWh4 currency
225 kWhEnergy used: 225 kWh1 currency
300 kWhEnergy used: 300 kWh-2 currency
450 kWhEnergy used: 450 kWh-8 currency
600 kWhEnergy used: 600 kWh-14 currency
900 kWhEnergy used: 900 kWh-26 currency

All inputs not changed in a row use: Energy used = 300 kWh; Plan A energy rate = 0.2 currency/kWh; Plan A fixed period charge = 15 currency; Plan B energy rate = 0.24 currency/kWh; Plan B fixed period charge = 5 currency. These are chosen examples, not current rates or product performance claims.

Common questions

What is the best electricity rate in Texas?

There is no single best plan for all homes. This tool compares two flat offers using your usage; it has no live Texas plan listings or eligibility checks.

Why does the cheaper kWh plan cost more?

Its fixed charge may be larger. At low consumption, the fixed part can outweigh the difference in unit rates.

What if both plans have the same rate?

Their difference is constant and comes from fixed charges. There is no unique consumption crossover.

Can I include a one-time sign-up bonus?

Allocate it transparently over the period you are comparing. The form treats fixed amounts as recurring period charges and rejects negative entries.

Does this compare commercial demand tariffs?

Only their simplified energy and fixed components. Add a demand-charge analysis for a meaningful full comparison.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • Virginia Cooperative Extension, publication 2901-9014: appliance energy estimationhttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
  • US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php