Electricity calculators / Appliances & equipment
Know your usage. Understand your bill.
Electric Heater Running Cost Calculator
A 1,500 W resistive heater at full input uses 1.5 kWh in one hour. A thermostat can reduce its on-time, but the setting alone does not reveal the fraction of an hour it runs. Enter an observed on-time fraction or compare stated scenarios rather than assuming it runs continuously whenever plugged in.
Your inputs
Your result
Awaiting your inputsEnter your values and press Calculate. Your result will appear here.
Clear units · Editable assumptions · Published formula sources
The method
Formula and calculation steps
kWh = input watts×hours/day×days×on-time fraction/1,000; cost = kWh×rate.
Calculate space heater, radiator or electric heating energy costs with an explicit thermostat on-time fraction.
- Identify the quantities and units required by the form.
- Use measurements, a current bill or relevant equipment data for the same period.
- Apply the displayed formula, then check the assumptions and related outputs.
This prices electrical input and does not determine room heating requirements. Heat-pump delivered heat and resistive heating input are different quantities.
1,500 W heaters, thermostat cycling and electric heating bills
A 1,500 W resistive heater at full input uses 1.5 kWh in one hour. A thermostat can reduce its on-time, but the setting alone does not reveal the fraction of an hour it runs. Enter an observed on-time fraction or compare stated scenarios rather than assuming it runs continuously whenever plugged in.
For an electric radiator or boiler, make sure the power input corresponds to the equipment included in the bill estimate. A heat pump may deliver more thermal energy than its electrical input, so enter measured electrical watts here. If you want to compare gas, propane and electric heating by useful heat, use the heating comparison tool.
Continue with: Appliance Running Cost Calculator · Home Electricity Usage Calculator · PC & Server Electricity Cost Calculator · Air Conditioner Electricity Cost Calculator
Check the numbers
Electric Heater Running Cost Calculator: calculated examples
Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.
Worked example with the starting inputs
Heater electrical input: 1,500 W; Operating hours per day: 4 h/day; On-time fraction: 100 %; Days in period: 30 days; Electricity unit rate: 0.2 currency/kWh. Heating electricity cost: 36 currency.
| Output | Computed value |
|---|---|
| Heating electricity cost | 36 currency |
| Period energy | 180 kWh |
| Cost per full-input hour | 0.3 currency/h |
How the answer changes
| Scenario | Changed input | Result |
|---|---|---|
| 1 h/day | Operating hours per day: 1 h/day | 9 currency |
| 2 h/day | Operating hours per day: 2 h/day | 18 currency |
| 3 h/day | Operating hours per day: 3 h/day | 27 currency |
| 4 h/day | Operating hours per day: 4 h/day | 36 currency |
| 6 h/day | Operating hours per day: 6 h/day | 54 currency |
| 8 h/day | Operating hours per day: 8 h/day | 72 currency |
| 12 h/day | Operating hours per day: 12 h/day | 108 currency |
All inputs not changed in a row use: Heater electrical input = 1,500 W; Operating hours per day = 4 h/day; On-time fraction = 100 %; Days in period = 30 days; Electricity unit rate = 0.2 currency/kWh. These are chosen examples, not current rates or product performance claims.
Common questions
How much does a 1,500 W heater cost per hour?
At full input it uses 1.5 kWh. At 0.20 per kWh, that costs 0.30 in one hour.
Is a 2 kW heater twice as expensive as a 1 kW heater?
At the same on-time and unit price, yes. In a thermostat-controlled room their actual on-times may differ.
Do all electric heaters have the same running cost?
Equal measured input energy costs the same at the same tariff. Controls, schedules and the amount of heating needed affect purchased kWh.
Can I use this for a heat pump?
Only with its electrical input. This page does not estimate COP or heat delivery from outdoor temperature.
Does this size a heater for my room?
No. Heat-loss and comfort design require more information than an electricity cost estimate.
Which inputs should I verify before using this result?
Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.
Where do the formulas and example values come from?
The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.
Related calculators
Formula sources and references
These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.
- Virginia Cooperative Extension, publication 2901-9014: appliance energy estimationhttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
- US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php