Electricity Costby Voltage Drop Calculator

Electricity calculators / Appliances & equipment

Know your usage. Understand your bill.

Appliance Cycle Cost Calculator

A per-cycle energy figure can represent an appliance more accurately than maximum watts multiplied by the entire program length. Washing machines heat, pump and spin at different times; dryers and dishwashers also change operating state. Use data for the selected cycle, load and temperature rather than mixing incompatible program figures.

Your inputs

kWh/cycle
cycles/week
currency/kWh

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Annual kWh = kWh/cycle×cycles/week×52; cost per cycle = kWh/cycle×rate.

Calculate washing machine, dishwasher or dryer electricity costs from energy per complete cycle.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

Enter electricity per cycle, not water consumption or a power rating. Annual totals use 52 weeks and exclude water, detergent and separately supplied hot-water costs.

Laundry, dishwashing and batch equipment energy use

A per-cycle energy figure can represent an appliance more accurately than maximum watts multiplied by the entire program length. Washing machines heat, pump and spin at different times; dryers and dishwashers also change operating state. Use data for the selected cycle, load and temperature rather than mixing incompatible program figures.

For a tumble dryer electricity bill, enter kWh for one complete drying load and the average weekly number of loads. The same arithmetic supports a batch machine when its electrical cycle has a defined start and finish. It does not include gas heat or externally heated water unless those purchased energy amounts have been converted and intentionally added.

Check the numbers

Appliance Cycle Cost Calculator: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Energy per complete cycle: 1 kWh/cycle; Cycles per week: 5 cycles/week; Electricity unit rate: 0.2 currency/kWh. Annual cycle energy cost: 52 currency/year.

OutputComputed value
Annual cycle energy cost52 currency/year
Cost per cycle0.2 currency/cycle
Annual electricity260 kWh/year
Average monthly cost4.333333 currency/month

How the answer changes

ScenarioChanged inputResult
0.25 kWh/cycleEnergy per complete cycle: 0.25 kWh/cycle13 currency/year
0.5 kWh/cycleEnergy per complete cycle: 0.5 kWh/cycle26 currency/year
0.75 kWh/cycleEnergy per complete cycle: 0.75 kWh/cycle39 currency/year
1 kWh/cycleEnergy per complete cycle: 1 kWh/cycle52 currency/year
1.5 kWh/cycleEnergy per complete cycle: 1.5 kWh/cycle78 currency/year
2 kWh/cycleEnergy per complete cycle: 2 kWh/cycle104 currency/year
3 kWh/cycleEnergy per complete cycle: 3 kWh/cycle156 currency/year

All inputs not changed in a row use: Energy per complete cycle = 1 kWh/cycle; Cycles per week = 5 cycles/week; Electricity unit rate = 0.2 currency/kWh. These are chosen examples, not current rates or product performance claims.

Common questions

How do I calculate washing machine electricity cost?

Multiply the cycle’s measured kWh by your unit rate, then multiply by the number of cycles for the period.

Can I use rated motor watts?

Not as a substitute for complete cycle energy. Heating and multiple motor states can dominate the program’s consumption.

Are eco and normal cycles interchangeable?

No. Enter the kWh for the actual program. A longer program need not consume more energy if it uses lower temperatures or different operating states.

Does this include water and sewer charges?

No. It calculates only electricity from the supplied energy per cycle.

Why does the monthly average not equal four weeks?

The annual result uses 52 weeks, then divides by 12 for an average month; calendar months have more than exactly four weeks on average.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • Virginia Cooperative Extension, publication 2901-9014: appliance energy estimationhttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
  • US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php