Electricity Costby Voltage Drop Calculator

Electricity calculators / Power & energy

Know your usage. Understand your bill.

Power Factor from kWh & kvarh

Active and reactive energy meters can provide an aggregate power-triangle estimate over a common interval. Keep both register differences on the same dates and in compatible kilo-units. The calculated ratio describes the entered energy totals and does not expose short intervals with poor power factor.

Your inputs

kWh
kvarh

Example inputs are editable. Use your own equipment data and current tariff. Prices use one consistent currency: enter 20 cents or pence as 0.20.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Clear units · Editable assumptions · Published formula sources

The method

Formula and calculation steps

Displacement-energy approximation PF = kWh/√(kWh²+kvarh²).

Estimate an aggregate displacement power factor from matching active and reactive energy readings.

  1. Identify the quantities and units required by the form.
  2. Use measurements, a current bill or relevant equipment data for the same period.
  3. Apply the displayed formula, then check the assumptions and related outputs.

This ideal power-triangle calculation is not a harmonic true-power-factor measurement. Use matching periods and import/reactive conventions.

Power factor calculation from kWh and kvarh registers

Active and reactive energy meters can provide an aggregate power-triangle estimate over a common interval. Keep both register differences on the same dates and in compatible kilo-units. The calculated ratio describes the entered energy totals and does not expose short intervals with poor power factor.

If reactive energy changes direction or equipment has substantial harmonics, a single kvarh total may hide important behavior. This tool does not size correction capacitors, establish a utility penalty or replace an instrument that measures true power factor under the required conditions.

Check the numbers

Power Factor from kWh & kvarh: calculated examples

Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.

Worked example with the starting inputs

Energy used: 300 kWh; Reactive energy for same period: 100 kvarh. Aggregate ideal-triangle PF: 0.948683 ratio.

OutputComputed value
Aggregate ideal-triangle PF0.948683 ratio
Ideal apparent energy316.227766 kVAh
Assumed active energy300 kWh

How the answer changes

ScenarioChanged inputResult
75 kWhEnergy used: 75 kWh0.6 ratio
150 kWhEnergy used: 150 kWh0.83205 ratio
225 kWhEnergy used: 225 kWh0.913812 ratio
300 kWhEnergy used: 300 kWh0.948683 ratio
450 kWhEnergy used: 450 kWh0.976187 ratio
600 kWhEnergy used: 600 kWh0.986394 ratio
900 kWhEnergy used: 900 kWh0.993884 ratio

All inputs not changed in a row use: Energy used = 300 kWh; Reactive energy for same period = 100 kvarh. These are chosen examples, not current rates or product performance claims.

Common questions

What is the formula for power factor from energy?

Under the stated ideal assumptions, divide active kWh by the square root of active kWh squared plus reactive kvarh squared.

Is this the same as true power factor?

Not in all cases. Distortion and changing loads can make the aggregate ideal-triangle estimate differ from true measured power factor.

Can I enter monthly registers?

Use register differences for exactly the same month, with the same import/export conventions.

Does zero reactive energy mean unity PF?

In the ideal sinusoidal triangle it does if active energy is positive. Distortion can still affect true power factor.

Can this calculate a power-factor penalty?

No. Penalties depend on the actual tariff, measurement window and supplier rules.

Which inputs should I verify before using this result?

Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.

Where do the formulas and example values come from?

The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.

Formula sources and references

These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.

  • US Department of Energy: Fundamentals Handbook, Electrical Science, Volume 3, AC powerhttps://www.energy.gov/sites/default/files/2026-04/DOE-HDBK-1011-92_VOL3.pdf