Electricity calculators / Power & energy
Know your usage. Understand your bill.
kW, kVA & Power Factor Calculator
A kWh-to-kVA query mixes energy and power. Divide kWh by operating hours to obtain average kW, then divide by a suitable power factor to estimate kVA. This page starts with kW so that the required assumptions remain visible. Multiply kVA by 1,000 for VA.
Your inputs
Your result
Awaiting your inputsEnter your values and press Calculate. Your result will appear here.
Clear units · Editable assumptions · Published formula sources
The method
Formula and calculation steps
kVA = kW/PF; kWh = kW×hours; kVAh = kVA×hours under constant PF.
Calculate apparent power and energy from real power, power factor and operating time.
- Identify the quantities and units required by the form.
- Use measurements, a current bill or relevant equipment data for the same period.
- Apply the displayed formula, then check the assumptions and related outputs.
kVA and kWh are not directly interchangeable. Reactive power derived from the simple power triangle assumes a sinusoidal load without distortion effects.
kWh to kVA, VA and apparent energy
A kWh-to-kVA query mixes energy and power. Divide kWh by operating hours to obtain average kW, then divide by a suitable power factor to estimate kVA. This page starts with kW so that the required assumptions remain visible. Multiply kVA by 1,000 for VA.
At the same real kW, a lower power factor corresponds to higher apparent power. That matters for equipment loading and some tariffs, but kVAh and kWh describe different energy quantities. Do not assume a universal kWh-to-kVAh conversion ratio without knowing the load’s power factor over the measurement period.
Continue with: Watts to kWh Calculator · kWh to Average Power Calculator · Amps to kWh Calculator · kWh to Amps Calculator
Check the numbers
kW, kVA & Power Factor Calculator: calculated examples
Compare stated scenarios rather than an unexplained rule of thumb. Each row uses the same calculation function as the form.
Worked example with the starting inputs
Real power: 10 kW; True power factor: 0.8 ratio; Operating duration: 8 h. Apparent power: 12.5 kVA.
| Output | Computed value |
|---|---|
| Apparent power | 12.5 kVA |
| Real energy | 80 kWh |
| Apparent energy at constant PF | 100 kVAh |
| Ideal sinusoidal reactive power | 7.5 kvar |
How the answer changes
| Scenario | Changed input | Result |
|---|---|---|
| 0.2 ratio | True power factor: 0.2 ratio | 50 kVA |
| 0.4 ratio | True power factor: 0.4 ratio | 25 kVA |
| 0.6 ratio | True power factor: 0.6 ratio | 16.666667 kVA |
| 0.8 ratio | True power factor: 0.8 ratio | 12.5 kVA |
| 1 ratio | True power factor: 1 ratio | 10 kVA |
All inputs not changed in a row use: Real power = 10 kW; True power factor = 0.8 ratio; Operating duration = 8 h. These are chosen examples, not current rates or product performance claims.
Common questions
Can I convert kWh directly to kVA?
No. Supply a time interval and power factor. First convert energy to average real kW.
How do I convert kW to kVA?
Divide real kW by the power factor, which must be greater than zero and no greater than one.
Is kVA the same as watts?
No. Apparent kVA combines voltage and current; watts are real power. They coincide numerically only at unity power factor after unit scaling.
Does this size a power supply or UPS?
It gives a load relationship, not a complete selection. Surge, waveform, thermal and manufacturer constraints still apply.
Can I calculate reactive power?
The displayed ideal-triangle kvar assumes sinusoidal power. Distortion requires a fuller power-quality model.
Which inputs should I verify before using this result?
Check the units, dates and measurement boundary shown above. The examples are deliberately chosen scenarios rather than current tariffs, certified product ratings or promises about a particular installation.
Where do the formulas and example values come from?
The method is explained on this page and the published references are listed below as plain-text addresses. Example inputs are illustrative; comparison rows are computed with the same calculation function as the form.
Related calculators
Formula sources and references
These references support the units and underlying methods. Defaults and comparison cases are illustrative inputs, not current tariffs or product test data.
- US Department of Energy: Fundamentals Handbook, Electrical Science, Volume 3, AC powerhttps://www.energy.gov/sites/default/files/2026-04/DOE-HDBK-1011-92_VOL3.pdf
- US EIA: Measuring electricity; power and energy unitshttps://www.eia.gov/energyexplained/electricity/measuring-electricity.php